Hi Robby,
The remote for your Air Lift air spring suspension kit is likely just warning you that the psi got below 5psi and that's why the compressor kicked on to air the springs back up below the minimum threshold. If you saw any kind of error code number after the triangle/exclamation point symbol we could narrow down exactly what the issue was, but with the compressor kicking on I'd be willing to bet the springs were just low. If you look at the compress there should be a sticker somewhere... view full answer...
Hi Chris,
If your compressor is showing as missing then that tells me it's likely either a lack of power/was wired incorrectly or you have an air leak and the compressor was running for too long (4 minutes) and not building pressure. I recommend rechecking your wiring to make sure it's correct with no loose connections and then check the voltage at the compressor with a multimeter # PT89ZR to see if you're getting 12 volts. If not, then check your fuse and trace the power wire back to... view full answer...
Go To Results